QUADRIGA Polyurethanes and more - Snow scraper bars made from Vulkollan® D15 / Polyurethane D44
QUADRIGA Polyurethanes and more - Snow scraper bars made from Vulkollan® D15 / Polyurethane D44
+49 40 528 704-0 info.quadriga[at]spaeh.de
+49 40 528 704-0info.quadriga[at]spaeh.de

Snow scraper blades made from Vulkollan® D15 / Polyurethane D44

High wear resistance, low abrasion even on rough road surfaces and at the same time elastic enough to absorb unevenness, these properties make Vulkollan and Polyurethane the ideal material for end bars on the shovels of snow clearing vehicles.

 

Road surface and clearing equipment are thus optimally protected. The high tear resistance permits permanent screw connections. The far better properties (see PDF) enable significantly longer use than with conventional rubber strips made from SBR or NBR.

 

Available from our own production

 

  • Hardness setting 80 or 90±5 Shore
  • Length up to 6,000 mm cast in one piece
  • Width from 100 to 400 mm
  • Thickness from 10 to 60 mm
  • Sides with 90°- or 45°- angle
  • With bores or elongated holes
     
Flyer - QUADRIGA snow scraper bars
QUADRIGA_Schneeschuerfleisten_en_Stand_0[...]
PDF-Dokument [267.8 KB]

 

Our snow scraper bars are used, for example, in the following branches:

 

Drive roller and conveyor technology, mechanical engineering and plant construction, winter road maintenance, supply industry

QUADRIGA Dichtungs-GmbH Gutenbergring 47, 22848 NORDERSTEDT, GERMANY
T +49 40 528 704-0, F +49 40 523 7324, info.quadriga[at]spaeh.de

 

Contact

T +49 40 528704-0

F +49 40 5237324

vertrieb.quadriga[at]
spaeh.de

 

or use our 
contact form.